Lindsey 5900 Cross Arm Adaptor Universal to suit the 5930 roller. 

Lindsey 5930 Universal Stringing Roller, Proven design, excellent quality, light weight & rugged. Made in USA. Can be used in five different positions when mounted with the optional 5900 Universal Cross-arm Adaptor. The 5900 Adaptor is designe

Penta Pole insulated stick, 3.8m Ext. with universal head (1.4m closed length)
• Three fiberglass sections
• Top section of the stick is foam-cored
• Approximately 1.9kg in weight

LMF2 blade for outer sheath and primary insulation.
Cutting depth 7mm.

LMF2-S blade for thick outer sheath and primary insulation.
Cutting depth 11mm.

The PR4-C18-L101220 enables the user to make a circular and longtitudinal cut in order to remove cable's outer sheath.

All cutting depth ranging from 0.5mm / 0.020in to 5mm

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

Busbar adapter for 2 devices, for mounting of SL00/185 at busbar systems with 185mm centre-to-centre distance, for height adaption at SL1-3 Installation height 42mB

Alroc Saw for cutting armoured cable wires and hard outer sheaths.
Made of Aluminium so it is lightweight and only requires one hand to operate.

FAMECA HV voltage detector. Compact optical and acoustic detector with LEDs. Designed to test the absence of voltage on Hight-Voltage systems up to 735kV.
Rated voltage: 110kV to 220kV.
Frequency: 50 and 60Hz.
Length: 210mm Diameter

• “Universal” tool for end stripping or mid span stripping of outer jackets or insulating material 35-240 and 300-1000sq mm • End stripping and mid span stripping with different blades (interchangeable) • “Du

This plier removes the outer sheath with 3 adjustable cutting depths.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1mm and an interchangeable longitudinal cutting cartridge. (not

Outer Sheath Cutters Ripper Stripper Cast alloy powder-coated handle with a one-piece replaceable blade. The blade has a large blunt nose to prevent damage to inner cable insulation. Suitable for stripping outer cable sheaths. Longitudinal or circ

Plastic clip for insulating sheets and bands.
Guaranteed up to 1000V
Length 165mm, Weight 82g, Capacity 25mm

The red SR stylus can remove the outer semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm
Diameter: ø16 - 58 mm 
Must be used with the following too

FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 10 000V to 30 000V.
Mains F\frequency: 50 and 60 Hz.
Length: 275mm, Diameter: 56mm
Weight: 0.400kg.
Note: Elbow not included.

BTC230 TESTER FOR ELECTRICITY METERS. Use: Creates a load at subscriber meter terminals in order to check they are operating correctly. Suited for electromechanical or electronic meters.

PINTEL 4 BT Cable Stripper pliers.
Enables to make circular and longitudinal cut, including LV/MV cylindrical or sectoral conductor, in order to remove cable’s outer jacket.
For cable from 9 mm to 30 mm.
Circular cutting: 3.3

Testing and measuring the continuity of protective conductors and equipotential bonding.
Double-sleeved 1mm² PVC cable measurements.
Reverses automatically the polarities
CAT III-600V and CAT IV 300V safety rating.
Measure

FAMECA voltage detector with integrated self-test. Compact optical and acoustic detector with LEDs.
Rated voltage: 127V to 90 000V.
Frequency: 50 and 60Hz.
Length: 195mm, Diameter: 49mm
Weight: 0.270kg.

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

C-PROBE LV Ammeter, LV digital w/hookhead. - Allow single operators to measure current on overhead circuits without using platform or ladders. - Soft sensor will avoid stress on LV cable connections - Adapted to night operation: bright yellow

Alroc Sheath Stripper 21-35mm, removes the outer sheath.
Circular cutting thickness capacity 2,8mm.
Longitudinal cutting capacity 2,8mm.

RED TRL Blade NOT included

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1.5mm and an interchangeable

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

This plier removes the outer sheath.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.8mm and longitudinal cut depth of 3.3mm
For the cables outside diameter ranging between 26

Penta Pole Insulated Telescopic Stick, 5m Ext. with universal head (1.5m closed length)

• Four fiberglass sections

• Top section of the stick is foam-cored (Proof tested to 100kV per 300mm)

• Approximately 2.

Alroc Leadsheath Pliers for cables outside diameter ranging between 26 - 52mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Insulated tool. Guaranteed u

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

Alroc Leadsheath Pliers for cables outside diameter ranging between 46 – 74 mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Guaranteed up t

Phase Tester 1000V CatIV-IP65 with interface. PHASE TESTER FOR LV NETWORK 1000V CAT IV - IP65 It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors…. UNITAG

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Seven fiberglass sections
• Top section of the stick is foam-cored
• Approximately 4.7kg in

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Eight fiberglass sections
• Top section of the stick is foam-cored
• Approximately 5.5kg in

Penta Pole insulated stick, 12m Ext. with universal head (1.8m closed length)
• Nine fiberglass sections
• Top section of the stick is foam-cored
• Approximately 6.3kg in w

12 cal / cm^{2 ,} Highly Transparent visor, True Colour Vision, allowis user to see red as red, white as white etc. Universal Band to fit on Australian Designed Helmets. Hard coating on outside, anti fog

The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.

Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work. 

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

Download our Electro-PJP catalogue in PDF format.
Find the test and measurement instruments you need for electrical, electronic and electrotechnical applications.
You can take an order in our website or order with the reference number in

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

ALROC BMF-40-90 tool to carry out tools stop. 
It’s a great tool to prepare the cable ready for joint installation, termination or connector. 
Cable diameter from Ø40 to 90mm. 

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

INSULATED RATCHET CABLE CUTTER Ø 25 MM WITH INSULATING HEAD COVER 290MM L ALUM 300MMSQ & COPPER 240MMSQ - EN 60900 / IEC 60900.  this tool can be used with a wedge with groove 5544E.

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C