You have no items in your shopping cart.
Details
The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will detect any nominal voltage on overhead lines and stations. It will avoid detecting most induced voltages in order to allow grounding operations.
Advatages:
-
Optimised indication that can be understood clearly in all working conditions:
• The visual indication is visible in all usual working environments, in sunlight or fog, with a wide angle of visibility and from the side thanks to an optic ring.
• The 100 dB sound signal is designed to remains audible even in traffic or strong wind, thanks to its acoustic “horn”.
-
Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:
• Accidental interchange of housing or circuitry;
• Damage to electronic circuits;
• Humidity ingress into the device when the battery is replaced outdoors.
Specifications:
- Possible choice of AC voltage range from 1-4kV to 69kV
- Complies with IEC 61243-1 Voltage Detector Capacitive Type
- To be used for voltages exceeding 1kV AC
- Network Frequency: 50 & 60 Hz
- Permanent standy-by status with automatic wake up function
- Self test function
- Designed for Indoor & Outdoor use
- Operating Temperature: -25°C to 55°C
- Humidity: 96 max
- Housing: Polycarbonate (Yellow)
- 9V Battery operated
Additional Information
Extra Information | No |
---|---|
Send inquiry? | No |
ebs_extended_descr | No |