Ø4mm Stackable test lead. Banana plug to banana plug.
Rated voltage : ≤30VAC  ≤60VDC
Rated current: 12A
Connexion: 4mm
Length: 50cm
Colour: Red

BNC insulated adapter female / Two Ø4mm safety plug.
CAT II-1000V safety rating.
Rated current: 3A
Connexion: 4mm
Colour: Black / Red

Ø4mm Safety test lead. Stackable banana plug to right-angle banana plug.
CAT II-600V safety rating.
Rated current: 12A
Connexion: 4mm
Length: 150cm
Colour: Yellow / Green

Ø4mm Safety stackable test lead. Banana plug to banana plug.
CAT II-600V safety rating.
Rated current: 20A
Connexion: 4mm
Length: 150cm
Colour: Red

Smooth ground rod
Connexion : 4mm female
Diameter : 12mm
Length : 42cm
Material : Galvanized steel

Ø2mm safety banana socket with 10mm diameter round nut / 4.8X9mm flat connecting tab.
CAT II-600V safety rating.
Rated current: 10A
Insulation: PA6.6
Contact parts: Brass / Ni coated
Colour: Black

Ø4mm Test lead. Banana plug (male) to banana plug (male).
CAT IV-1000V and CAT III-1000V safety rating.
Rated current: 25A
Connexion: 4mm
Length: 100cm
Colour: Red

Ø4mm Test lead. Banana plug (male) to right angle plug (male).
CAT III-1000V safety rating.
Rated current: 36A
Connexion: 4mm
Length: 150cm

Ø4mm Test lead. Banana plug (male) to right angle plug (male).
CAT III-1000V safety rating.
Rated current: 36A
Connexion: 4mm
Length: 200cm
Colour: Red

Ø 4mm stackable safety banana plugs (male)
CAT II-1000 V safety rating.
Rated current: 25A
Length : 150cm
Colour: Red

Ø 4mm stackable safety banana plugs (male)
CAT III-1000 V safety rating.
Rated current: 20A
Length : 150cm
Colour: Red

Description: Ø 4mm straight banana plug to straight banana plug.
Rated voltage : ≤30VAC   ≤60VDC
Rated current: 36A
Length : 25cm
Colour: Red

Ø 4mm right-angled banana socket / Horizontal PCB setting up.
CAT III-1000V safety rating.
Rated current: 25A
Insulation: PA6
Contact parts : Ni coated brass
Colour : Red

Ø4mm safety banana socket with 14.5mm diameter round nut / M4 threaded stud and hex nuts terminal.
CAT III-1000V safety rating.
Rated current: 36A
Insulation: PA6.6
Contact parts: Brass / Ni Coated
Colour: Red

Ø 4mm Safety banana socket with hexagonal nut / 6.3X10mm flat connecting tab.
CAT III-1000V safety rating.
Rated current: 36A
Insulation PA6.6
Contact: Brass / Ni coated
Colour: Red

Ø 4mm Safety banana socket with 14.5mm round nut / 6.3X10mm flat connecting tab.
CAT III-1000V safety rating.
Rated current: 36A
Insulation PA6.6
Contact : Brass / Ni coated
Colour : Red

LMF2 blade for outer sheath and primary insulation.
Cutting depth 7mm.

LMF2-S blade for thick outer sheath and primary insulation.
Cutting depth 11mm.

Alroc Saw for cutting armoured cable wires and hard outer sheaths.
Made of Aluminium so it is lightweight and only requires one hand to operate.

FAMECA HV voltage detector. Compact optical and acoustic detector with LEDs. Designed to test the absence of voltage on Hight-Voltage systems up to 735kV.
Rated voltage: 110kV to 220kV.
Frequency: 50 and 60Hz.
Length: 210mm Diameter

• “Universal” tool for end stripping or mid span stripping of outer jackets or insulating material 35-240 and 300-1000sq mm • End stripping and mid span stripping with different blades (interchangeable) • “Du

This plier removes the outer sheath with 3 adjustable cutting depths.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1mm and an interchangeable longitudinal cutting cartridge. (not

Hylec Class 2 Insulated mats

Ins. Mat Dk Grey Class 2 1mx10mx3.5mm

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

Insulated hacksaw. A product designed to do a safe work in LV live working.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 450mm, Weight 740g, Blade length 300mm

Insulated junior hacksaw. Used for a more precise cutting, confined area cutting or application that requires a neater finish.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 263mm, Weight 150g, Blade length 130mm

Fully Insulated Rotoline Classic screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length: 125mm

Fully Insulated Rotoline Classic screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Fully Insulated Rotoline Turn screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length:125mm

Fully Insulated Rotoline Turn screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Plastic clip for insulating sheets and bands.
Guaranteed up to 1000V
Length 165mm, Weight 82g, Capacity 25mm

Fully Insulated screwdriver Phillips head 5X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size: PH1, Blade length 100mm, Weight 60g

Fully Insulated screwdriver flat head 6.5X150mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm, Weight 85g

Fully Insulated screwdriver hex head 2.5X100mm.

Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 2.5mm, Blade length 100mm

Fully Insulated screwdriver hex head 3X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 3mm, Blade length 100mm

The red SR stylus can remove the outer semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm
Diameter: ø16 - 58 mm 
Must be used with the following too

FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 10 000V to 30 000V.
Mains F\frequency: 50 and 60 Hz.
Length: 275mm, Diameter: 56mm
Weight: 0.400kg.
Note: Elbow not included.

Fully Insulated stubby screwdriver Pozidriv 6X40mm.
Standards : EN 60900 / IEC 60900 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6mm, Blade length 40mm, Weight 34g

PINTEL 4 BT Cable Stripper pliers.
Enables to make circular and longitudinal cut, including LV/MV cylindrical or sectoral conductor, in order to remove cable’s outer jacket.
For cable from 9 mm to 30 mm.
Circular cutting: 3.3

Testing and measuring the continuity of protective conductors and equipotential bonding.
Double-sleeved 1mm² PVC cable measurements.
Reverses automatically the polarities
CAT III-600V and CAT IV 300V safety rating.
Measure

BTC230 TESTER FOR ELECTRICITY METERS. Use: Creates a load at subscriber meter terminals in order to check they are operating correctly. Suited for electromechanical or electronic meters.

FAMECA voltage detector with integrated self-test. Compact optical and acoustic detector with LEDs.
Rated voltage: 127V to 90 000V.
Frequency: 50 and 60Hz.
Length: 195mm, Diameter: 49mm
Weight: 0.270kg.

The TT7R2LW is a mobile device designed for field testing, allowing to inspect the electric insulation’s defects or cleanliness on equipment before using, or within the preliminary frame of the periodical and in

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

Alroc Sheath Stripper 21-35mm, removes the outer sheath.
Circular cutting thickness capacity 2,8mm.
Longitudinal cutting capacity 2,8mm.

RED TRL Blade NOT included

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1.5mm and an interchangeable

Electrically Insulating Helmet with Integrated Face Shield.

Highest protection against arc flash, class 2 according to BOX TEST,

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

This plier removes the outer sheath.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.8mm and longitudinal cut depth of 3.3mm
For the cables outside diameter ranging between 26

Insulating Glove Class "4" 36kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "4" glove is for electrical work with maximum voltage of 36,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class 0 1,000V 36cm (14inch) Black IEC 60903

The Regeltex Class "0" glove is for electrical work with maximum voltage of 1,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&nbs

Insulating Glove Class "1" 7.5kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "1" glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class "2" 17kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class "3" 26.6kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "3" glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect workers interacting with expose

The Arc Flash Gloves, supplied by Hylec are made from Indura Ultra Soft fabric. The highest level of quality and protection in an FR cotton fabric. 88% cotton and 12% high tenacity nylon with guaranteed flame resistance for the life of the garment

Alroc Leadsheath Pliers for cables outside diameter ranging between 26 - 52mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Insulated tool. Guaranteed u

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 0 composite glove is for electrical work with maximum voltage of 1,000 volts. It is an essential piece of PPE designed to protect w

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

Alroc Leadsheath Pliers for cables outside diameter ranging between 46 – 74 mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Guaranteed up t

Hand Held Remote Electrical Field Detector with direction Barrell detects live conducts at ground level HV Remote Electrical Field Detector. The DCEDB382 remotely detects the presence of electrical fields from the pylon or even from the groun

TransVision Shield^™  Next-generation arc flash protection.

Clear Vision - Darkens instantly to protect your eyes

The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

FAMECA's operating insulating stick 1.5m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply