Fully Insulated Rotoline Turn screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Fully Insulated Rotoline Turn screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length:125mm

Fully Insulated Rotoline Classic screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Fully Insulated Rotoline Classic screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length: 125mm

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

The TT7R2LW is a mobile device designed for field testing, allowing to inspect the electric insulation’s defects or cleanliness on equipment before using, or within the preliminary frame of the periodical and in

C-PROBE LV Ammeter, LV digital w/hookhead. - Allow single operators to measure current on overhead circuits without using platform or ladders. - Soft sensor will avoid stress on LV cable connections - Adapted to night operation: bright yellow

The Arc Flash Gloves, supplied by Hylec are made from Indura Ultra Soft fabric. The highest level of quality and protection in an FR cotton fabric. 88% cotton and 12% high tenacity nylon with guaranteed flame resistance for the life of the garment

Phase Tester 1000V CatIV-IP65 with interface. PHASE TESTER FOR LV NETWORK 1000V CAT IV - IP65 It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors…. UNITAG

Hand Held Remote Electrical Field Detector with direction Barrell detects live conducts at ground level HV Remote Electrical Field Detector. The DCEDB382 remotely detects the presence of electrical fields from the pylon or even from the groun

TransVision Shield^™  Next-generation arc flash protection.

Clear Vision - Darkens instantly to protect your eyes

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

FAMECA Bipolar voltage detector. Composed with a probe and a pole that allows the detection of DC voltages as well as AC.
Rated voltage: 400V to 3600V.
Meta case size: 450x345x127mm
Weight: 1.75kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 250 000 to 440 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 450 000 to 800 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 50 000 to 100 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a

Fameca 8kA/1s Earthing device using insulating rope for bare MV overhead lines. Spring Clamp for conductors 3 - 32MM Diameter. 

Use with Fameca "DROPOVER" stick attachment. 

Fameca 13kA/1s Earthing device using insulating rope for bare MV overhead lines. Spring Clamp for conductors 3 - 32MM Diameter. 

Use with Fameca "DROPOVER" stick attachment. 

Insulated single head ring spanner, inclined head 15 degree.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Diameter 13mm, Weight 60g

Insulated reversible ratchet spanner 3/8inch.
Standards : EN 60900 / IEC 60900 / ISO 1174-1 / ISO 3315
Guaranteed up to 1000V
Length 190mm, Weight 250g, Square drive 3/8”

SIBILLE OUTILLAGE ® TORQUE WRENCH ATEX II, non reversible ratchet. Top quality tool.

IP54 Clip on LED Torch up to 36mm thick, Swivel Head 180 degree, Magnetized on any steel element, On any flat surface (protective pads), • Inadvertent anti-ignition system • Electronic LED protection (in case of polarity reversal), &bull

DIELECTRIC 20kV OVER BOOTS designed to be worn over the top of shoes or boots. Available in sizes M, L & XL • Ingenious rear entry design ensures boot is quick and easy to fit and remove, • Fuel and oil resistant, • Re

E1036/SL- “ISO-LINK” Meter Isolating Link, Supplied fitted with isolating Link ,22mm diameter Queensland Standard, Back wired, Front wired Cat No E1038/SL also available. Dimensions 86Lx4

Compact Detector c/w Stick 5-36kV with audio

VOLTAGE DETECTOR 5-36 KV WITH COMPACT STICK

Use: Voltage detector with compact insulating stick to check the presence of the nominal voltage by direct contact inside MV substations.