You have no items in your shopping cart.
Search results for 'HV phasing'
Search results for: 'HV phasing'
-
-
Remote Wireless Phasor w/LTE Gateway
True Phase Identification System Our vision has always been to create a phase identification system that exceeds any of today’s industry quality, safety and efficiency requirements. SPI-III’s unique design consists of a wireless bi-module comb -
HV voltage detector 110-220kV
FAMECA HV voltage detector. Compact optical and acoustic detector with LEDs. Designed to test the absence of voltage on Hight-Voltage systems up to 735kV.
Rated voltage: 110kV to 220kV.
Frequency: 50 and 60Hz.
Length: 210mm Diameter -
Voltage detector 10kV to 30kV
FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 10 000V to 30 000V.
Mains F\frequency: 50 and 60 Hz.
Length: 275mm, Diameter: 56mm
Weight: 0.400kg.
Note: Elbow not included. -
Voltage detector integrated test 127-90k
FAMECA voltage detector with integrated self-test. Compact optical and acoustic detector with LEDs.
Rated voltage: 127V to 90 000V.
Frequency: 50 and 60Hz.
Length: 195mm, Diameter: 49mm
Weight: 0.270kg. -
Voltage Detector 1-69kV Single Range
The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d
-
Voltage Detector 1-69kV Dual Range
The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d
-
Voltage Detector 1-69kV Multi Range
The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will detect any nominal voltage o -
-
Glove Ins Cl1 Sz10 L16inchBlack 7.5kV
Insulating Glove Class "1" 7.5kV 41cm (16 inch) Black. IEC 60903
The Regeltex Class "1" glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&
-
Glove Ins Cl2 Sz10 L16inchBlack 17kV
Insulating Glove Class "2" 17kV 41cm (16 inch) Black. IEC 60903
The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&
-
HV Remote Electrical Field Detector
Hand Held Remote Electrical Field Detector with direction Barrell detects live conducts at ground level HV Remote Electrical Field Detector. The DCEDB382 remotely detects the presence of electrical fields from the pylon or even from the groun
-
Penta Pole 7.5m univ head(1.67m)- height
Height Measuring Penta Pole Telescopic Stick 7.7m with universal head(1.65m) • Six (6) fiberglass sections • Top section of the stick is foam-cored -
Penta Pole 9m univ head(1.74m)- height
Height Measuring Penta Pole Telescopic Stick 9.1m with universal head(1.71m) • Six (7) fiberglass sections • Top section of the stick is foam-cored -
Penta Pole 10.5m univ head(1.80m) height
Height Measuring Penta Pole Telescopic Stick 10.5m with universal head(1.78m) • Six (8) fiberglass sections • Top section of the stick is foam-cored -
Penta Pole 12m univ head (1.84m)- height
Height Measuring Penta Pole Telescopic Stick 12m with universal head(1.78m) • Six (9) fiberglass sections • Top section of the stick is foam-cored -
-
ASCR1 Cable Stripper 14-40mm
ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust -
ASCR2 Cable Stripper 20-50mm
ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust -
LH2 Insulation Cable Stripper 38-60mm
Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.< -
XLPE Insulation Cable Stripper 60-80mm
Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m -
XLPE Insulation Cable Stripper 80-110mm
Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m -
Aladin Electric Field Detector 10-400kV
Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W -
Lector Wireless Volt Reader MV handheld Meter wireless signals Lector Detector
Handheld Wireless Volt Reader (c/w VECTOR) -
Voltage detector DC 400-3600V 157621
FAMECA Bipolar voltage detector. Composed with a probe and a pole that allows the detection of DC voltages as well as AC.
Rated voltage: 400V to 3600V.
Meta case size: 450x345x127mm
Weight: 1.75kg. -
HV voltage detector 250 to 440kV
FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 250 000 to 440 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg. -
HV voltage detector 450 to 800kV
FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 450 000 to 800 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg. -
HV voltage detector 50 to 100kV
FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 50 000 to 100 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg. -
Indoor Kit with TAG5010 4-230kV QLD
Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a
-
Phasor5K Series 4-230kV+case50Hz TV1.8kV
TAG5010 4-230 AU 50HZ Also available in 4-132kV and 11-33kV. Fameca HV Wireless Phasor Wide Range contact, Outdoor, On Board test, sunrise head, audio visual. 50Hz proven in Australian conditions for over 20 years
&nPhasor Wide Range EHV c/w EHV Probe Hook
Phasor Wide Range EHV c/w EHV Probe Hook
(Specify required ranges)
Available in 4-132kV, 4-230kV and 11-33kV
Fameca HV Wireless Phasor Wide Range contact,
Outdoor, On Board test, sunrise head, audio vis
HV Rescue & Operator Kit IP44 WallMnt
HV Rescue and operations kit with HRC2 & HRC4 Arc Flash kits.
RescueStick - Detector combo, Dielectric Overboots, GCA 3 in 1 Insulating Arc Flash gloves 36kV, Insulating Stool, Indoor Wall Mountable Cabin
HV Rescue Hook 2m 90kV
Insulated High Voltage Rescue Hook/Crook 2m is an essential piece of equipment designed for rescuing a person/technician who is being subjected to an electrical shock working on category 1, 2 and 3 substations. It is used to grasp the injured pers
HV Rescue Hook 1.5m 45kV
Insulated High Voltage Rescue Hook/Crook 1.5m is an essential piece of equipment designed for rescuing a person/technician who is being subjected to an electrical shock working on category 1, 2 and 3 substations. It is used to grasp the injured pe