Ø4mm Stackable test lead. Banana plug to banana plug.
Rated voltage : ≤30VAC  ≤60VDC
Rated current: 12A
Connexion: 4mm
Length: 50cm
Colour: Red

Description: Ø 4mm straight banana plug to straight banana plug.
Rated voltage : ≤30VAC   ≤60VDC
Rated current: 36A
Length : 25cm
Colour: Red

Penta Pole insulated stick, 3.8m Ext. with universal head (1.4m closed length)
• Three fiberglass sections
• Top section of the stick is foam-cored
• Approximately 1.9kg in weight

LMF2 blade for outer sheath and primary insulation.
Cutting depth 7mm.

LMF2-S blade for thick outer sheath and primary insulation.
Cutting depth 11mm.

The PR4-C18-L101220 enables the user to make a circular and longtitudinal cut in order to remove cable's outer sheath.

All cutting depth ranging from 0.5mm / 0.020in to 5mm

Alroc Saw for cutting armoured cable wires and hard outer sheaths.
Made of Aluminium so it is lightweight and only requires one hand to operate.

FAMECA HV voltage detector. Compact optical and acoustic detector with LEDs. Designed to test the absence of voltage on Hight-Voltage systems up to 735kV.
Rated voltage: 110kV to 220kV.
Frequency: 50 and 60Hz.
Length: 210mm Diameter

• “Universal” tool for end stripping or mid span stripping of outer jackets or insulating material 35-240 and 300-1000sq mm • End stripping and mid span stripping with different blades (interchangeable) • “Du

This plier removes the outer sheath with 3 adjustable cutting depths.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1mm and an interchangeable longitudinal cutting cartridge. (not

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

Insulated hacksaw. A product designed to do a safe work in LV live working.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 450mm, Weight 740g, Blade length 300mm

Insulated junior hacksaw. Used for a more precise cutting, confined area cutting or application that requires a neater finish.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 263mm, Weight 150g, Blade length 130mm

Fully Insulated Rotoline Classic screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length: 125mm

Fully Insulated Rotoline Classic screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Fully Insulated Rotoline Turn screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length:125mm

Fully Insulated Rotoline Turn screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Busbar adapter for 2 devices, for mounting of SL00/185 at busbar systems with 185mm centre-to-centre distance, for height adaption at SL1-3 Installation height 42mB

Plastic clip for insulating sheets and bands.
Guaranteed up to 1000V
Length 165mm, Weight 82g, Capacity 25mm

Fully Insulated screwdriver Phillips head 5X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size: PH1, Blade length 100mm, Weight 60g

Fully Insulated screwdriver flat head 6.5X150mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm, Weight 85g

Fully Insulated screwdriver hex head 2.5X100mm.

Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 2.5mm, Blade length 100mm

Fully Insulated screwdriver hex head 3X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 3mm, Blade length 100mm

The red SR stylus can remove the outer semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm
Diameter: ø16 - 58 mm 
Must be used with the following too

NH fuse-links with utilization category gG mostly with combi indicator and live gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

NH fuse-links with utilization category gG mostly with combi indicator and live gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

NH fuse-links with utilization category gG mostly with combi indicator and live gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

NH fuse-links with utilization category gG mostly with combi indicator and live gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

NH fuse-links with utilization category gG mostly with combi indicator and live gripping lugs according to IEC 60269 respectively DIN EN 60269-1 and DIN VDE 0636-2 with a rated voltage of AC500V.

FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 10 000V to 30 000V.
Mains F\frequency: 50 and 60 Hz.
Length: 275mm, Diameter: 56mm
Weight: 0.400kg.
Note: Elbow not included.

Fully Insulated stubby screwdriver Pozidriv 6X40mm.
Standards : EN 60900 / IEC 60900 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6mm, Blade length 40mm, Weight 34g

PINTEL 4 BT Cable Stripper pliers.
Enables to make circular and longitudinal cut, including LV/MV cylindrical or sectoral conductor, in order to remove cable’s outer jacket.
For cable from 9 mm to 30 mm.
Circular cutting: 3.3

C-PROBE LV Ammeter, LV digital w/hookhead. - Allow single operators to measure current on overhead circuits without using platform or ladders. - Soft sensor will avoid stress on LV cable connections - Adapted to night operation: bright yellow

Testing and measuring the continuity of protective conductors and equipotential bonding.
Double-sleeved 1mm² PVC cable measurements.
Reverses automatically the polarities
CAT III-600V and CAT IV 300V safety rating.
Measure

FAMECA voltage detector with integrated self-test. Compact optical and acoustic detector with LEDs.
Rated voltage: 127V to 90 000V.
Frequency: 50 and 60Hz.
Length: 195mm, Diameter: 49mm
Weight: 0.270kg.

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

Alroc Sheath Stripper 21-35mm, removes the outer sheath.
Circular cutting thickness capacity 2,8mm.
Longitudinal cutting capacity 2,8mm.

RED TRL Blade NOT included

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1.5mm and an interchangeable

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

Fameca TAG780 LV Detector with Trigger IPX2x  Heavy duty voltage detector for checking the absence of voltage and giving voltage level indication on low voltage up to 1000V. This device provides additional features as : Display

This plier removes the outer sheath.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.8mm and longitudinal cut depth of 3.3mm
For the cables outside diameter ranging between 26

Penta Pole Insulated Telescopic Stick, 5m Ext. with universal head (1.5m closed length)

• Four fiberglass sections

• Top section of the stick is foam-cored (Proof tested to 100kV per 300mm)

• Approximately 2.

Insulating Glove Class "4" 36kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "4" glove is for electrical work with maximum voltage of 36,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class 0 1,000V 36cm (14inch) Black IEC 60903

The Regeltex Class "0" glove is for electrical work with maximum voltage of 1,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&nbs

Insulating Glove Class "1" 7.5kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "1" glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class "2" 17kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class "3" 26.6kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "3" glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect workers interacting with expose

Alroc Leadsheath Pliers for cables outside diameter ranging between 26 - 52mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Insulated tool. Guaranteed u

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 0 composite glove is for electrical work with maximum voltage of 1,000 volts. It is an essential piece of PPE designed to protect w

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

Alroc Leadsheath Pliers for cables outside diameter ranging between 46 – 74 mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Guaranteed up t

Phase Tester 1000V CatIV-IP65 with interface. PHASE TESTER FOR LV NETWORK 1000V CAT IV - IP65 It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors…. UNITAG

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Seven fiberglass sections
• Top section of the stick is foam-cored
• Approximately 4.7kg in