De-energized three phase cable identifier and phaser. STANDARD - Complying to European Directives and CE marking - Specific design complying with international safety regulation concerning operation and access to electrical networks and installations USE - This cable identifier is the first to work on a 3 phase de-energized cable short-circuited and earthed at both ends. - Allows to identify this cable on all its length, at its ends or in a trench among other cables energized or not. - Allows a positive identification of the 3 phase conductors of this cable before and after cutting on both sides of the cut. ADVANTAGES - With 7 sets of specific frequencies, the transmitted signal cannot be detected on nearby cables. - Signal injection is done by 3 transducers on cable terminals at one of its ends as the cable is grounded and short-circuited at both ends (earthing switch or temporary grounding at both ends). - All necessary information available on the cable as soon as the transmitter is connected. - No need of commuting between job site and feeder pillar or substations until the end of the job. - With the use of the 2 additional included transducers, identification of phase conductors can be directly performed on both ends of the identified and cut cable without having to move the transmitter. - Plug and play device : no setting - The choice of probe defines the function or the information expected : • Identification of cable including paper-lead / steel armored cables. • Identification of phase conductors before and after cutting, on both ends simultaneously. • Checking conductor continuity between site and feeder pillar. TECHNICAL SPECIFICATIONS Convenient for : - Paper-lead or dry cables, steel armored cables - Overhead and underground. - Cable length up to 10km. Availability : - The transmitter can operate on battery or mains supply. - It is designed to be permanently loading. - Transport in a watertight and robust case. Référence Dimensions FC2310AFR 520 x 435 x 230 mm : »13 kg FC2310AGB FC2310AKSA FC2310AAL FC2310AUAE