The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will detect any nominal voltage on overhead lines and stations. It will avoid detecting most induced voltages in order to allow grounding operations.

Advatages:

• Optimised indication that can be understood clearly in all working conditions:

  • The visual indication is visible in all usual working environments, in sunlight or fog, with a wide angle of visibility and from the side thanks to an optic ring.

  • The 100 dB sound signal is designed to remains audible even in traffic or strong wind, thanks to its acoustic “horn”.

• Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:

  • Accidental interchange of housing or circuitry;

  • Damage to electronic circuits;

  • Humidity ingress into the device when the battery is replaced outdoors.

Specifications:

• Possible choice of AC voltage range from 1-4kV to 69kV
• Complies with IEC 61243-1 Voltage Detector Capacitive Type
• To be used for voltages exceeding 1kV AC
• Network Frequency: 50 & 60 Hz
• Permanent standy-by status with automatic wake up function
• Self test function
• Designed for Indoor & Outdoor use
• Operating Temperature: -25°C to 55°C
• Humidity: 96 max
• Housing: Polycarbonate (Yellow)
• 9V Battery operated