You have no items in your shopping cart.
Subtotal: Ex GST $0.00
Search results for 'hylec Class 2 Insulated mats99999" union select unhex(hex(version())) -- "x"="x'
Search results for: 'hylec Class 2 Insulated mats99999" union select unhex(hex(version())) -- "x"="x'
-
BMFD/50-160 Stop Suit 50-160mm
ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm. -
CWF3-60 Cable Stripper 16-58mm
ALROC CWF3/60 tool removes outer sheath and insulation.
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2 -
BMF-40-90 Stop Suit 40-90mm
ALROC BMF-40-90 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø40 to 90mm. -
FC2310CPTIXTHY Cable & PhaseVocal ID
Fameca FC2310 Cable Identifier for De-energised Cable. De-energized three phase cable identifier and phaser - Voice over cable ID,Network Mapper -
Insul. Stick 1.5m Sunrise Head
FAMECA's operating insulating stick 1.5m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
-
Insulated long nose angled pliers 210mm
Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Insulated Universal Pliers 185mm
Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g
Ins. Stick 1.0m w/sunrise head
FAMECA's operating insulating stick 1.0m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
Insulation Stick 1.8m length with sunrise head 1 x section
FAMECA's operating insulating stick 1.8m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
Fully Insulated Long Nose Pliers 190mm
Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g
Fully Insulated Universal Pliers 200mm
Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g
PED 50mm2 P1.5m E15m 1.8m Sticks C/W Bag
PED Portable Earthing Device 50mm2 P1.5m E15m 1.8m Sticks C/W Bag.
Hylec Manufacture under licence from Fameca France: Portable Earthing systems, Short Circuiting Equipment as well as Custom Portable Earthing Equipment.
Hylec
Fully Insulated Universal Pliers 185mm
Fully Insulated Universal Pliers 185mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 330g
Insulated Long Nose Flat Pliers 170mm
Insulated flat nose pliers 170mm.
Standards: EN 60900 / CIEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 185g, Nose length 50mm
Insulated Universal Pliers 220mm EOL
Insulated Universal Pliers 220mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 220mm, Weight 450gEx GST $32.00
Insulated Stripping Pliers 175mm
Insulated wire stripper 175mm.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 175mm, Weight 260g
40 cal Arc Flash Kit -Extra Large
Stanco TTEK 40 cal Arc Flash kit complete with FR quick adjust helmet to keep the hood from moving on the head. Long coat & Velcro leggings for quick fit, good for muddy work environments or where boots are not allowed to be removed. Kit comes with
HRC2 Blue Coveralls Arc Flash kit 12 cal
Cat 2 Arc Flash Kit containing:
Glove Kit, Carry Bag, Face shield Rating HRC2 >8 cal/cm2, helmet, Coveralls colour Royal Blue, Regeltex Rubber Electrical Gloves GLB Class 0 1000V Beige, 999 HRC2 Arc Flash Leather Outer gloves.
<
Ins Stick Kit 4 x 1.5m w/Bag
Hylec's operating insulating stick 1.5m screw type are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply i.e. Earthing,
Glove Ins Cl2 Sz10 L16inchBeige 17kV
Insulating Glove Class "2" 17,000kV 41cm (16 inch) Beige. IEC 60903
The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with expo
Hylec - Voltage Detection & Identification Instruments
CATALOGUE - Hylec ESP Voltage Detection & Identification Instruments
Hylec - Earthing & Short Circuit Devices
CATALOGUE - Hylec ESP Earthing and Short Circuiting Devices
Glove Ins Cl00 Sz10 L14inchBlack 500V
Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903
The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed
Glove Ins Cl2, 17kV 74.5 cal Sz10 16Com"
Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675
The Regeltex Class 2 composite glove is for electrical work with maximum voltage of 17,000 volts. It is an essential pi
Glove Ins Cl3, 26.5kV 73.2cal Sz10 16 C"
Composite Insulating Gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675
The Class 3 composite glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect
Glove Ins Cl4, 36kV 87.7cal Sz10 16 Com"
Composite Insulating gloves with ARC Flash protection The Regeltex Class 4 composite glove is for electrical work with maximum voltage of 36,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed High Volta
FC300012 Cable Mapper LV 12 Channels
C300012 Cable Mapper LV 12 Channel FC3000 is smart grid ready and allows the Utility to map the cable feeders from Padmounts to consumer terminals and beyond. Only the FC3000 allows up to 8 central units to be used with one Line unit allowing greater
Stanco HRC2 Arc Flash 12.4 cal Kit 2
Stanco HRC2 Arc Flash 12.4 cal Kit 2. Contents: Knee Length 50" Coat, GCA Class 0 Electrical Mechanical Arc Flash Gloves, Standard Hood, Australian Designed Standard helmet (for under hood use) , 15" Leggings, GB50 Deluxe
12.4 cal Suit Kit c/w Gear Bag XL
A/F 12.4 cal Suit Kit c/w Std Hood XL
- Stanco Arc Flash ( PPE ) Protective Switching Suit - Clothing Kit. Conforming to Standard: NFPA 70E HRC/CAT 4 ASTM D6413. Available Standard Cal ratings: 8, 12, 21, 25, 40, 44, 57 & 74cal.
40cal ArcFlash Kit CoatTrouserGlove HRC4
Stanco TTK 40 cal Arc Flash kit complete with FR quick adjust helmet to keep the hood from moving on the head. Waist length coat & sleeveless Bib / Trousers made from Westex material, providing excellent protection. Kit comes with US214 Arc Flas
XLPE Insulation Chamfer tool 14-40mm
Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.
XLPE Insulation Cable Stripper 38-60mm
Alroc XLPE enable a chamfer of 30 mm at the extremity of the insulation of MV cables. For 38 - 60mm cable diameter.
LH2 Insulation Cable Stripper 38-60mm
Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<
SRC Adjustable Scoring Stylus Gold
The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to
XLPE Insulation Cable Stripper 60-80mm
Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m
SRC-D Adjustable Scoring Stylus Silver
The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin
XLPE Insulation Cable Stripper 80-110mm
Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m
SCH Insulation Chamfering Stylus Green
The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C
Resistive Discharge Probe 5m Tail wClamp
High Voltage DC Resistive Discharge Stick 900mm long with 5 Meter Earth lead & hook. 40kV 7.2kJ 6uF.For discharging high voltage cables after testing. Highly flexible, silicone earth cable. The discharge probe consist of a pointed probe connected to
Phase Displacement
Real three phase automatic ratio tester for power transformer The ART-3D™ series of ratio meters are high precision instruments, designed to measure turn ratios, phase displacements, excitation currents of single phase and three phase power, di
video title
video content
