You have no items in your shopping cart.
Search results for 'hylec Class 2 Insulated mats' and 'x'='y,www.hylec.com.au/catalogsearch/result/index?dir,hylec.com.au,0.016274441'
Search results for: 'hylec Class 2 Insulated mats' and 'x'='y,www.hylec.com.au/catalogsearch/result/index?dir,hylec.com.au,0.016274441'
-
Insulated Stripping Pliers 175mm
Insulated wire stripper 175mm.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 175mm, Weight 260g -
Insulated Universal Pliers 220mm EOL
Insulated Universal Pliers 220mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 220mm, Weight 450gEx GST $32.00 -
Insulated Long Nose Flat Pliers 170mm
Insulated flat nose pliers 170mm.
Standards: EN 60900 / CIEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 185g, Nose length 50mm -
-
Fully Insulated Universal Pliers 185mm
Fully Insulated Universal Pliers 185mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 330g -
PED 50mm2 P1.5m E15m 1.8m Sticks C/W Bag
PED Portable Earthing Device 50mm2 P1.5m E15m 1.8m Sticks C/W Bag.
Hylec Manufacture under licence from Fameca France: Portable Earthing systems, Short Circuiting Equipment as well as Custom Portable Earthing Equipment.
Hylec
-
Fully Insulated Universal Pliers 200mm
Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g -
Fully Insulated Long Nose Pliers 190mm
Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g -
Insulation Stick 1.8m length with sunrise head 1 x section
FAMECA's operating insulating stick 1.8m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
-
Ins. Stick 1.0m w/sunrise head
FAMECA's operating insulating stick 1.0m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
-
-
Insulated Universal Pliers 185mm
Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g -
Insulated long nose angled pliers 210mm
Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000VInsul. Stick 1.5m Sunrise Head
FAMECA's operating insulating stick 1.5m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply
FC2310CPTIXTHY Cable & PhaseVocal ID
Fameca FC2310 Cable Identifier for De-energised Cable. De-energized three phase cable identifier and phaser - Voice over cable ID,Network MapperBMF-40-90 Stop Suit 40-90mm
ALROC BMF-40-90 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø40 to 90mm.CWF3-60 Cable Stripper 16-58mm
ALROC CWF3/60 tool removes outer sheath and insulation.
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2BMFD/50-160 Stop Suit 50-160mm
ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.Electro-PJP Catalogue
Download our Electro-PJP catalogue in PDF format.
Find the test and measurement instruments you need for electrical, electronic and electrotechnical applications.
You can take an order in our website or order with the reference number inCable Stripper & Chamfer tool 16-58mm
ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
LengMF3-40 Cable Stripper 16-40mm
ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
LengMF2-40 Cable Stripper 16-40mm
ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.MF1+/25 Cable stripper 14-44mm
MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.CWB/18-60 Cable Stripper 18-60mm
Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work.
CAMF4 Cable Stripper 40-49mm
The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.ASCR2 Cable Stripper 20-50mm
ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
AdjustASCR1 Cable Stripper 14-40mm
ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
AdjustBRMRD1E Cable Stripper 14-40mm
ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mmIns Stick Kit 4 x 1.5m w/Bag
Hylec's operating insulating stick 1.5m screw type are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply i.e. Earthing,
HRC2 Blue Coveralls Arc Flash kit 12 cal
Cat 2 Arc Flash Kit containing:
Glove Kit, Carry Bag, Face shield Rating HRC2 >8 cal/cm2, helmet, Coveralls colour Royal Blue, Regeltex Rubber Electrical Gloves GLB Class 0 1000V Beige, 999 HRC2 Arc Flash Leather Outer gloves.
<
40 cal Arc Flash Kit -Extra Large
Stanco TTEK 40 cal Arc Flash kit complete with FR quick adjust helmet to keep the hood from moving on the head. Long coat & Velcro leggings for quick fit, good for muddy work environments or where boots are not allowed to be removed. Kit comes withGlove Ins Cl2 Sz10 L16inchBeige 17kV
Insulating Glove Class "2" 17,000kV 41cm (16 inch) Beige. IEC 60903
The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with expo
Hylec - Voltage Detection & Identification Instruments
CATALOGUE - Hylec ESP Voltage Detection & Identification InstrumentsHylec - Earthing & Short Circuit Devices
CATALOGUE - Hylec ESP Earthing and Short Circuiting DevicesGlove Ins Cl00 Sz10 L14inchBlack 500V
Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903
The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed
Glove Ins Cl2, 17kV 74.5 cal Sz10 16Com"
Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675
The Regeltex Class 2 composite glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piGlove Ins Cl3, 26.5kV 73.2cal Sz10 16 C"
Composite Insulating Gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675
The Class 3 composite glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect
Glove Ins Cl4, 36kV 87.7cal Sz10 16 Com"
Composite Insulating gloves with ARC Flash protection The Regeltex Class 4 composite glove is for electrical work with maximum voltage of 36,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed High VoltaFC300012 Cable Mapper LV 12 Channels
C300012 Cable Mapper LV 12 Channel FC3000 is smart grid ready and allows the Utility to map the cable feeders from Padmounts to consumer terminals and beyond. Only the FC3000 allows up to 8 central units to be used with one Line unit allowing greaterCable Locator Passive 50Hz Detector 33Hz Kit
Schonstedt XTPC pipe and cable locator kit. "A fantastic, reliable, light weight -easy to use cable and pipe detector, this kit is all you need for your day to day detection work. Please note: In all cases (regardless of brand or model) to deteStanco HRC2 Arc Flash 12.4 cal Kit 2
Stanco HRC2 Arc Flash 12.4 cal Kit 2. Contents: Knee Length 50" Coat, GCA Class 0 Electrical Mechanical Arc Flash Gloves, Standard Hood, Australian Designed Standard helmet (for under hood use) , 15" Leggings, GB50 Deluxe
12.4 cal Suit Kit c/w Gear Bag XL
A/F 12.4 cal Suit Kit c/w Std Hood XL
- Stanco Arc Flash ( PPE ) Protective Switching Suit - Clothing Kit. Conforming to Standard: NFPA 70E HRC/CAT 4 ASTM D6413. Available Standard Cal ratings: 8, 12, 21, 25, 40, 44, 57 & 74cal.
40cal ArcFlash Kit CoatTrouserGlove HRC4
Stanco TTK 40 cal Arc Flash kit complete with FR quick adjust helmet to keep the hood from moving on the head. Waist length coat & sleeveless Bib / Trousers made from Westex material, providing excellent protection. Kit comes with US214 Arc FlasMultirange Testing Clamp with IP2X RED
Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.
Insulated Cable Cutting Pliers 230mm
Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g