Hylec glove bag is made from PVC material. This will suit to store all classes of insulating glove and leather over glove with 36cm (14 inch) length from Class 00 to 4.

This triple pocket glove bag supplied by Hylec is made from a canvas material. This will suit all classes of insulating gloves with two (2) extra pockets to fit all your insulating glove accessories.

Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

Hylec glove bag is made from heavy duty canvas material. This will suit to store all classes of insulating gloves and leather over gloves with 41cm (16 inch) length from class 00 to 4.

TESTER FOR INSULATING GLOVES

Use: The purpose of the tester is to ensure that the glove is absolutely air-tight.

The BGT Sibille Safe Glove box has been designed for the safe storage and protection of electrical gloves. This unit is portable with folding handle, it can also be wall mounted for use in electrical substations, technical rooms etc. 

Regeltex RGX-1704 is a quick drying professional rubber cleaner in a ready to use 200ml spray bottle.RGX is specifically developed to properly clean rubber insulating materials such as gloves and mats. For best results we recommend to us

Talc Powder Flask 50g

Powder flask with removable nozzle and cap, filled with Luzenac talcum powder. Talcum powder makes the insulating gloves more comfortable by limiting the effects of sweating, it also makes the donning and doffing of t

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

The DSP tool remove and catch the peelable semiconductor at the end of cable.
Diameter: ø10 - 80 mm.
Can be used with the following tools: MF1+/25, SR, SRC, MF1+/60, SRC-D, MF3/40, MF3/60.

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

The Alroc EVP enables the user to flare and spread the lead sheath or the tabs made from the lead sheath. Spread without damaging underlying layers.

Road Shell Cable Cover - suits Warm Climate Low Profile 120mm. Two channels 92mm & four channels 40mm

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 1 composite glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect w

ARCCAG24ARC FLASH BALACLAVA - ATPV 24,7 CAL/CM²EN ISO 11612 / EN 61482-1-2 / ASTM F1506 / NFPA70EUse:Provides protection of the face and the neck against thermal hazards, especially against burn hazards from an arc flash. It does not spread t

ARCCAG10 FLAME RESISTANT AND ARC FLASH RESISTANT BALACLAVA, ATPV 12,1 CAL/CM²EN ISO 11612 (A1 AND A2 B1 C1 F1) / IEC 61482- 2 / EN 61482-1-2 (CLASS 1 ACCORDING TO BOX TEST), ASTM F1959-05 (12,1 CAL/CM², HAF 81,6% ACCORDING TO OPEN ARC ME

Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.

Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

Insulated Pliers Side Cutter 190mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 190mm, Weight 370g

INSULATED RATCHET CABLE CUTTER Ø 25 MM WITH INSULATING HEAD COVER 290MM L ALUM 300MMSQ & COPPER 240MMSQ - EN 60900 / IEC 60900.  this tool can be used with a wedge with groove 5544E.

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

A/F 12.4 cal Suit Kit c/w Std Hood XL

• Stanco Arc Flash ( PPE ) Protective Switching Suit - Clothing Kit. Conforming to Standard: NFPA 70E HRC/CAT 4 ASTM D6413. Available Standard Cal ratings: 8, 12, 21, 25, 40, 44, 57 & 74cal.

Composite Insulating Gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 3 composite glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Regeltex Class 2 composite glove is for electrical work with maximum voltage of 17,000 volts. It is an essential pi

Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903

The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed 

Insulating Glove Class "2" 17,000kV 41cm (16 inch) Beige. IEC 60903

The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with expo