The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

FAMECA's operating insulating stick 1.5m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.

Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work. 

FAMECA's operating insulating stick 1.0m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply

FAMECA's operating insulating stick 1.8m length supplied by Hylec are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

Download our Electro-PJP catalogue in PDF format.
Find the test and measurement instruments you need for electrical, electronic and electrotechnical applications.
You can take an order in our website or order with the reference number in

Fully Insulated Universal Pliers 185mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 330g

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

Insulated flat nose pliers 170mm.
Standards: EN 60900 / CIEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 185g, Nose length 50mm

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

ALROC BMF-40-90 tool to carry out tools stop. 
It’s a great tool to prepare the cable ready for joint installation, termination or connector. 
Cable diameter from Ø40 to 90mm. 

Insulated Universal Pliers 220mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 220mm, Weight 450g

Insulated wire stripper 175mm.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 175mm, Weight 260g

Hylec's operating insulating stick 1.5m screw type are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply i.e. Earthing,

Insulating Glove Class "2" 17,000kV 41cm (16 inch) Beige. IEC 60903

The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with expo

Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903

The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed 

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Regeltex Class 2 composite glove is for electrical work with maximum voltage of 17,000 volts. It is an essential pi

Composite Insulating Gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 3 composite glove is for electrical work with maximum voltage of 26,600 volts. It is an essential piece of PPE designed to protect

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

Insulated Pliers Side Cutter 190mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 190mm, Weight 370g

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C

Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g

Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.

Composite Insulating gloves with ARC Flash protection. Standards IEC 60903, 61482-1-2, ASTM F2675

The Class 1 composite glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect w

The Alroc EVP enables the user to flare and spread the lead sheath or the tabs made from the lead sheath. Spread without damaging underlying layers.

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

The DSP tool remove and catch the peelable semiconductor at the end of cable.
Diameter: ø10 - 80 mm.
Can be used with the following tools: MF1+/25, SR, SRC, MF1+/60, SRC-D, MF3/40, MF3/60.

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

FAMECA Bipolar voltage detector. Composed with a probe and a pole that allows the detection of DC voltages as well as AC.
Rated voltage: 400V to 3600V.
Meta case size: 450x345x127mm
Weight: 1.75kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 250 000 to 440 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 450 000 to 800 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 50 000 to 100 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a

TAG5010 4-230 AU 50HZ Also available in 4-132kV and 11-33kV. Fameca HV Wireless Phasor Wide Range contact, Outdoor, On Board test, sunrise head, audio visual. 50Hz proven in Australian conditions for over 20 years

Phasor Wide Range EHV c/w EHV Probe Hook

(Specify required ranges)

Available in 4-132kV, 4-230kV and 11-33kV

Fameca HV Wireless Phasor Wide Range contact,

Outdoor, On Board test, sunrise head, audio vis

VESELECTRICAL SAFETY KIT 36kV

Use : The electrical safety kit allows to assist people in presence of electrical hazards, up to 25 kV network with model VES25 or up to 36 kV network with model VES36.

This kit is particularly suitabl

Stripping knife, energy cable preparation tool.
Guaranteed up to 1000V.
Supplied with blade protection. Standard IEC 60900.
Length 200mm, Weight 60g.

PART NUMBER: Hylec Low Voltage Rescue Kit 
Deluxe LV Rescue Kit - Low Voltage. Assembled to many various Australian specifications. Hi vis, Mining & custom kits available upon request. As per the a

Knife for stripping operation. Supplied with soft case.
Standards EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 160mm, Blade length 40mm, Weight 100g.

Insulated High Voltage Rescue Hook/Crook 2m is an essential piece of equipment designed for rescuing a person/technician who is being subjected to an electrical shock working on category 1, 2 and 3 substations. It is used to grasp the injured pers

Insulated High Voltage Rescue Hook/Crook 1.5m is an essential piece of equipment designed for rescuing a person/technician who is being subjected to an electrical shock working on category 1, 2 and 3 substations. It is used to grasp the injured pe

Insulated adjustable spanner 200mm.
Standards : EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 200mm

Insulated slip-joint pliers.
Standards: EN 60900 / IEC 60900 / ISO 8976 / ISO 5744
Guaranteed up to 1000V
Length 250mm, Max. opening 28mm, Weight 440g

Insulated single head cranked ring spanner (12 sided).
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1711-1 / ISO 3318 / ISO 10102
Guaranteed up to 1000V
Diameter 21mm, Weight 320g

Insulated single head ring spanner, inclined head 15 degree.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Diameter 13mm, Weight 60g

Insulated single open-ended spanner.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1711-1 / ISO 3318 / ISO 10102
Guaranteed up to 1000V
Opening 17mm, Weight 100g

Fully insulated adjustable spanner.
Reduce the risk of short-circuiting
Standards : EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 315mm, Max. jaw opening 34mm, Weight 1120g

Insulated adjustable spanner.
Standards: EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 210mm, Max. jaw opening 24mm, Weight 300g

Insulated reversible ratchet spanner 3/8inch.
Standards : EN 60900 / IEC 60900 / ISO 1174-1 / ISO 3315
Guaranteed up to 1000V
Length 190mm, Weight 250g, Square drive 3/8”

Insulated short extension 1/2inch with mechanical locking.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 265mm, Weight 490g

Insulated Torque Wrench 1/2”.
Standards: EN 60900 / IEC 60900 / EN 6789
Guaranteed up to 1000V
Length 315mm, Weight 850g, Square drive 1/2” Torque capacity 8-50 Nm