12 cal / cm^{2 ,} Highly Transparent visor, True Colour Vision, allowis user to see red as red, white as white etc. Universal Band to fit on Australian Designed Helmets. Hard coating on outside, anti fog

The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

ALROC BMF-40-90 tool to carry out tools stop. 
It’s a great tool to prepare the cable ready for joint installation, termination or connector. 
Cable diameter from Ø40 to 90mm. 

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

Download our Electro-PJP catalogue in PDF format.
Find the test and measurement instruments you need for electrical, electronic and electrotechnical applications.
You can take an order in our website or order with the reference number in

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work. 

The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g

Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903

The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed 

Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.

Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

INSULATED RATCHET CABLE CUTTER Ø 25 MM WITH INSULATING HEAD COVER 290MM L ALUM 300MMSQ & COPPER 240MMSQ - EN 60900 / IEC 60900.  this tool can be used with a wedge with groove 5544E.

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

The DSP tool remove and catch the peelable semiconductor at the end of cable.
Diameter: ø10 - 80 mm.
Can be used with the following tools: MF1+/25, SR, SRC, MF1+/60, SRC-D, MF3/40, MF3/60.

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

The Alroc EVP enables the user to flare and spread the lead sheath or the tabs made from the lead sheath. Spread without damaging underlying layers.

Road Shell Cable Cover - suits Warm Climate Low Profile 120mm. Two channels 92mm & four channels 40mm

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

TESTER FOR INSULATING GLOVES

Use: The purpose of the tester is to ensure that the glove is absolutely air-tight.

Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W

FAMECA Bipolar voltage detector. Composed with a probe and a pole that allows the detection of DC voltages as well as AC.
Rated voltage: 400V to 3600V.
Meta case size: 450x345x127mm
Weight: 1.75kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 250 000 to 440 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 450 000 to 800 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 50 000 to 100 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a

TAG5010 4-230 AU 50HZ Also available in 4-132kV and 11-33kV. Fameca HV Wireless Phasor Wide Range contact, Outdoor, On Board test, sunrise head, audio visual. 50Hz proven in Australian conditions for over 20 years

HV Rescue and operations kit with HRC2 & HRC4 Arc Flash kits. 

RescueStick - Detector combo, Dielectric Overboots, GCA 3 in 1 Insulating Arc Flash gloves 36kV, Insulating Stool, Indoor Wall Mountable Cabin