TransVision Shield^™  Next-generation arc flash protection.

Clear Vision - Darkens instantly to protect your eyes

The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.

Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work. 

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

Download our Electro-PJP catalogue in PDF format.
Find the test and measurement instruments you need for electrical, electronic and electrotechnical applications.
You can take an order in our website or order with the reference number in

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

ALROC BMF-40-90 tool to carry out tools stop. 
It’s a great tool to prepare the cable ready for joint installation, termination or connector. 
Cable diameter from Ø40 to 90mm. 

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g

Fully Insulated Universal Pliers 185mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 330g

Insulated flat nose pliers 170mm.
Standards: EN 60900 / CIEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 185g, Nose length 50mm

Insulated Universal Pliers 220mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 220mm, Weight 450g

Insulated wire stripper 175mm.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 175mm, Weight 260g

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

Insulated Pliers Side Cutter 190mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 190mm, Weight 370g

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g

The Alroc EVP enables the user to flare and spread the lead sheath or the tabs made from the lead sheath. Spread without damaging underlying layers.

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

The DSP tool remove and catch the peelable semiconductor at the end of cable.
Diameter: ø10 - 80 mm.
Can be used with the following tools: MF1+/25, SR, SRC, MF1+/60, SRC-D, MF3/40, MF3/60.

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

Individual electric field detection with headlamp.
For MV Overhead lines 10 000 to 69 000V, work from elevated platforms only.
Provide extra safety level for workers operating near energized equipment.
Dimensions: 87x60x34mm.
W

FAMECA Bipolar voltage detector. Composed with a probe and a pole that allows the detection of DC voltages as well as AC.
Rated voltage: 400V to 3600V.
Meta case size: 450x345x127mm
Weight: 1.75kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 250 000 to 440 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 450 000 to 800 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

FAMECA high voltage DC detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 50 000 to 100 000 V DC
Length: 350mm, Diameter: 80mm
Weight: 0.550kg.

Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a

Stripping knife, energy cable preparation tool.
Guaranteed up to 1000V.
Supplied with blade protection. Standard IEC 60900.
Length 200mm, Weight 60g.

Knife for stripping operation. Supplied with soft case.
Standards EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 160mm, Blade length 40mm, Weight 100g.

Fameca 13kA/1s Earthing device using insulating rope for bare MV overhead lines. Spring Clamp for conductors 3 - 32MM Diameter. 

Use with Fameca "DROPOVER" stick attachment. 

Fameca 8kA/1s Earthing device using insulating rope for bare MV overhead lines. Spring Clamp for conductors 3 - 32MM Diameter. 

Use with Fameca "DROPOVER" stick attachment. 

Insulated adjustable spanner 200mm.
Standards : EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 200mm

Insulated slip-joint pliers.
Standards: EN 60900 / IEC 60900 / ISO 8976 / ISO 5744
Guaranteed up to 1000V
Length 250mm, Max. opening 28mm, Weight 440g

Insulated single head cranked ring spanner (12 sided).
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1711-1 / ISO 3318 / ISO 10102
Guaranteed up to 1000V
Diameter 21mm, Weight 320g

Insulated single head ring spanner, inclined head 15 degree.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Diameter 13mm, Weight 60g

Insulated single open-ended spanner.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1711-1 / ISO 3318 / ISO 10102
Guaranteed up to 1000V
Opening 17mm, Weight 100g

Fully insulated adjustable spanner.
Reduce the risk of short-circuiting
Standards : EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 315mm, Max. jaw opening 34mm, Weight 1120g

Insulated adjustable spanner.
Standards: EN 60900 / IEC 60900 / ISO 1711-1 / ISO 6787
Guaranteed up to 1000V
Length 210mm, Max. jaw opening 24mm, Weight 300g

Insulated reversible ratchet spanner 3/8inch.
Standards : EN 60900 / IEC 60900 / ISO 1174-1 / ISO 3315
Guaranteed up to 1000V
Length 190mm, Weight 250g, Square drive 3/8”

Insulated short extension 1/2inch with mechanical locking.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 265mm, Weight 490g

SIBILLE OUTILLAGE ® TORQUE WRENCH ATEX II, non reversible ratchet. Top quality tool.

Insulated Torque Wrench 1/2”.
Standards: EN 60900 / IEC 60900 / EN 6789
Guaranteed up to 1000V
Length 315mm, Weight 850g, Square drive 1/2” Torque capacity 8-50 Nm

Insulated Torque Wrench 3/8”.
Standards: EN 60900 / IEC 60900 / EN 6789
Guaranteed up to 1000V
Length 340mm, Weight 820g, Square drive 3/8” Torque capacity 8-50 Nm

Insulated 11mm 1/2 inch female socket. 12point.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1174-1 / ISO 1711-1 / ISO 2725-1
Guaranteed up to 1000V.
Size 11mm, Drive type 12-sided, We

Insulated 8mm 1/2 inch female socket. 12 point.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1174-1 / ISO 1711-1 / ISO 2725-1
Guaranteed up to 1000V.
Size 21mm, Drive type 12-sided, Weight 100g

Insulated 6-sided female socket.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1174-1 / ISO 1711-1 / ISO 2725-1
Guaranteed up to 1000V.
Socket Size 17mm, Drive size 3/8inch, Drive type 6-sided, Weight 60g

Insulated 6-sided female socket L.
Standards: EN 60900 / IEC 60900 / ISO 691 / ISO 1174-1 / ISO 1711-1 / ISO 2725-1
Guaranteed up to 1000V.
Socket Size 10mm, Drive size 3/8inch, Drive type 6-sided, Weight 60g

Insulated 6-sided male socket.
Standards: EN 60900 / IEC 60900 / ISO 1174-1 / ISO 2936
Guaranteed up to 1000V.
Socket Size 6mm, Drive size 3/8inch, Drive type 6-sided, Weight 50g

Insulated male T hex keys 6 sided.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V.
Diameter 5mm, Length 140mm, Weight 85g

Insulated male hexagonal T keys.
Standards: EN 60900 / IEC 60900 / ISO 1174-1.
Guaranteed up to 1000V.
Diameter 3mm.

Insulated male hexagonal T keys.
Standards: EN 60900 / IEC 60900 / ISO 1174-1
Guaranteed up to 1000V
Diameter 3/16 inch

Insulated male hex key 90 degree.
Standards: EN 60900 / IEC 60900 / ISO 2936
Guaranteed up to 1000V
Diameter 5mm, L long handle 125mm, L small handle 85mm, Weight 20g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691
Guaranteed up to 1000V.
Diam inch 1/2', Blade length 150mm, Handle length 128mm, Weight 210g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691
Guaranteed up to 1000V.
Diam 17mm, Blade length 150mm, Handle length 128mm, Weight 275g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691
Guaranteed up to 1000V.
Diam N°BA 0BA, Blade length 150mm, Handle length 117mm, Weight 170g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691
Guaranteed up to 1000V.
Diam 13mm, Blade length 150mm, Handle length 128mm, Weight 235g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691
Guaranteed up to 1000V.
Diam N°BA 2BA, Blade length 150mm, Handle length 117mm, Weight 170g

Insulated hexagonal nut driver.
Standards: EN 60900 / IEC 60900 / ISO 691.
Guaranteed up to 1000V.
Diam 10mm, Blade length 150mm, Handle length 117mm, Weight 170g.

Fully insulated T handle spanner.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Diameter 6 sided 19mm, Length 305mm, Weight 750g

Cable bending tool for 120-degree aluminium sector cable. Suits 95 mm² - 150 mm² & 240 mm².
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V