Ø 4mm Stackable fixed safety banana plug / screw terminal.
CAT III-1000V safety rating.
Rated current: 36A
Contact parts: Ni coated brass
Insulation: PP
Colour: Red

BNC insulated adapter female / Two Ø4mm safety plug.
CAT II-1000V safety rating.
Rated current: 3A
Connexion: 4mm
Colour: Black / Red

Ø4mm Safety test lead. Stackable banana plug to right-angle banana plug.
CAT II-600V safety rating.
Rated current: 12A
Connexion: 4mm
Length: 150cm
Colour: Yellow / Green

Ø 4mm stackable safety banana plugs (male)
CAT II-1000 V safety rating.
Rated current: 25A
Length : 150cm
Colour: Red

The PR4-C18-L101220 enables the user to make a circular and longtitudinal cut in order to remove cable's outer sheath.

All cutting depth ranging from 0.5mm / 0.020in to 5mm

Insulated junior hacksaw. Used for a more precise cutting, confined area cutting or application that requires a neater finish.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 263mm, Weight 150g, Blade length 130mm

BTC230 TESTER FOR ELECTRICITY METERS. Use: Creates a load at subscriber meter terminals in order to check they are operating correctly. Suited for electromechanical or electronic meters.

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Seven fiberglass sections
• Top section of the stick is foam-cored
• Approximately 4.7kg in

Hand Held Remote Electrical Field Detector with direction Barrell detects live conducts at ground level HV Remote Electrical Field Detector. The DCEDB382 remotely detects the presence of electrical fields from the pylon or even from the groun

The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

Its uniqu

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

A/F 12.4 cal Suit Kit c/w Std Hood XL

• Stanco Arc Flash ( PPE ) Protective Switching Suit - Clothing Kit. Conforming to Standard: NFPA 70E HRC/CAT 4 ASTM D6413. Available Standard Cal ratings: 8, 12, 21, 25, 40, 44, 57 & 74cal.

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

TAG5010 4-230 AU 50HZ Also available in 4-132kV and 11-33kV. Fameca HV Wireless Phasor Wide Range contact, Outdoor, On Board test, sunrise head, audio visual. 50Hz proven in Australian conditions for over 20 years

Phasor Wide Range EHV c/w EHV Probe Hook

(Specify required ranges)

Available in 4-132kV, 4-230kV and 11-33kV

Fameca HV Wireless Phasor Wide Range contact,

Outdoor, On Board test, sunrise head, audio vis

Stripping knife, energy cable preparation tool.
Guaranteed up to 1000V.
Supplied with blade protection. Standard IEC 60900.
Length 200mm, Weight 60g.

HV Rescue and operations kit with HRC2 & HRC4 Arc Flash kits. 

RescueStick - Detector combo, Dielectric Overboots, GCA 3 in 1 Insulating Arc Flash gloves 36kV, Insulating Stool, Indoor Wall Mountable Cabin