BNC insulated adapter female / Two Ø4mm safety plug.
CAT II-1000V safety rating.
Rated current: 3A
Connexion: 4mm
Colour: Black / Red

Penta Pole insulated stick, 3.8m Ext. with universal head (1.4m closed length)
• Three fiberglass sections
• Top section of the stick is foam-cored
• Approximately 1.9kg in weight

Hylec Class 2 Insulated mats

Ins. Mat Dk Grey Class 2 1mx10mx3.5mm

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

Insulated junior hacksaw. Used for a more precise cutting, confined area cutting or application that requires a neater finish.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 263mm, Weight 150g, Blade length 130mm

Fully Insulated Rotoline Classic screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length: 125mm

Fully Insulated Rotoline Classic screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Fully Insulated Rotoline Turn screwdriver Phillips head 6X125.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size: PH2, Blade length:125mm

Fully Insulated Rotoline Turn screwdriver flat head 6.5X150.
Standards : EN 60900 / IEC 60900 / ISO 2380-1 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm

Plastic clip for insulating sheets and bands.
Guaranteed up to 1000V
Length 165mm, Weight 82g, Capacity 25mm

Fully Insulated screwdriver Phillips head 5X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size: PH1, Blade length 100mm, Weight 60g

Fully Insulated screwdriver flat head 6.5X150mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 6.5mm, Blade length 150mm, Weight 85g

Fully Insulated screwdriver hex head 2.5X100mm.

Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 2.5mm, Blade length 100mm

Fully Insulated screwdriver hex head 3X100mm.
Standards : EN 60900 / IEC 60900 / ISO 2380-1
Guaranteed up to 1000V
Tip size 3mm, Blade length 100mm

FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
Rated voltage: 10 000V to 30 000V.
Mains F\frequency: 50 and 60 Hz.
Length: 275mm, Diameter: 56mm
Weight: 0.400kg.
Note: Elbow not included.

Fully Insulated stubby screwdriver Pozidriv 6X40mm.
Standards : EN 60900 / IEC 60900 / ISO 8764-1
Guaranteed up to 1000V
Tip size 6mm, Blade length 40mm, Weight 34g

Insulated hacksaw. A product designed to do a safe work in LV live working.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 450mm, Weight 740g, Blade length 300mm

C-PROBE LV Ammeter, LV digital w/hookhead. - Allow single operators to measure current on overhead circuits without using platform or ladders. - Soft sensor will avoid stress on LV cable connections - Adapted to night operation: bright yellow

BTC230 TESTER FOR ELECTRICITY METERS. Use: Creates a load at subscriber meter terminals in order to check they are operating correctly. Suited for electromechanical or electronic meters.

Fameca TAG780 LV Detector with Trigger IPX2x  Heavy duty voltage detector for checking the absence of voltage and giving voltage level indication on low voltage up to 1000V. This device provides additional features as : Display

Penta Pole Insulated Telescopic Stick, 5m Ext. with universal head (1.5m closed length)

• Four fiberglass sections

• Top section of the stick is foam-cored (Proof tested to 100kV per 300mm)

• Approximately 2.

Insulating Glove Class 0 1,000V 36cm (14inch) Black IEC 60903

The Regeltex Class "0" glove is for electrical work with maximum voltage of 1,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&nbs

Insulating Glove Class "1" 7.5kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "1" glove is for electrical work with maximum voltage of 7,500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Insulating Glove Class "2" 17kV 41cm (16 inch) Black. IEC 60903

The Regeltex Class "2" glove is for electrical work with maximum voltage of 17,000 volts. It is an essential piece of PPE designed to protect workers interacting with exposed&

Alroc Leadsheath Pliers for cables outside diameter ranging between 26 - 52mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Insulated tool. Guaranteed u

Phase Tester 1000V CatIV-IP65 with interface. PHASE TESTER FOR LV NETWORK 1000V CAT IV - IP65 It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors…. UNITAG

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Seven fiberglass sections
• Top section of the stick is foam-cored
• Approximately 4.7kg in

Penta Pole insulated stick, 9.2m Ext. with universal head (1.7m closed length)
• Eight fiberglass sections
• Top section of the stick is foam-cored
• Approximately 5.5kg in

Penta Pole insulated stick, 12m Ext. with universal head (1.8m closed length)
• Nine fiberglass sections
• Top section of the stick is foam-cored
• Approximately 6.3kg in w

Insulating half-round bent nose cable cutting pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V

Insulated Universal Pliers 185mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 320g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 190mm, Weight 110g

Insulating composite universal pliers with ceramic blades.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 200mm, Weight 170g

Fully Insulated Universal Pliers 185mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 330g

Insulated flat nose pliers 170mm.
Standards: EN 60900 / CIEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 185mm, Weight 185g, Nose length 50mm

Insulated Universal Pliers 220mm.
Standards: EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 220mm, Weight 450g

Insulated wire stripper 175mm.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 175mm, Weight 260g

Hylec's operating insulating stick 1.5m screw type are made from high quality foam-cored tubes that can be used on high voltage applications. With a universal (sunrise) end fitting, you can easily attach different adaptors to apply i.e. Earthing,

Insulating Glove Class 00 500V 36cm (14inch) Black IEC 60903

The Regeltex Class "00" glove is for electrical work with maximum voltage of 500 volts. It is an essential piece of PPE designed to protect workers interacting with exposed 

Insulating composite cable cutting pliers.
Standards: EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 190mm, Weight 165g
Apllication range: Opening 22mm, Aluminium 35mm² Copper 16mm²

INSULATED RATCHET CABLE CUTTER Ø 25 MM WITH INSULATING HEAD COVER 290MM L ALUM 300MMSQ & COPPER 240MMSQ - EN 60900 / IEC 60900.  this tool can be used with a wedge with groove 5544E.

Insulated Pliers Side Cutter 190mm.
Standards : EN 60900 / IEC 60900 / ISO 5743 / ISO 5744 / ISO 5749
Guaranteed up to 1000V
Length 190mm, Weight 370g

Insulated ratchet cable cutter 32mmOD.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 260mm, Weight 740g
Application range: Opening 32mm, Aluminium 300mm² Copper 340mm²

Insulated Pliers Cutter 230mm.
Standards : EN 60900 / IEC 60900
Guaranteed up to 1000V
Opening 24mm, Length 230mm, Weight 500g

Multi range testing clamp is used to connect a sensing device or voltage meter to an insulated conductor by puncturing the conductor insulation without the need of stripping.

Gripall Stick 1.22m/4ft OAL Orange. To suit shotgun ring / gripper spindles. This gripall / shotgun hot stick is an essential piece of Insulating equipment to protect technicians when working with high voltage machines and conductors, where a

TESTER FOR INSULATING GLOVES

Use: The purpose of the tester is to ensure that the glove is absolutely air-tight.

9.4 cal  HRC2  Kevlar Glove - Cut and Fire Resistant (FR)  Size 10

See below for product detail >>

TAG5010 4-230 AU 50HZ Also available in 4-132kV and 11-33kV. Fameca HV Wireless Phasor Wide Range contact, Outdoor, On Board test, sunrise head, audio visual. 50Hz proven in Australian conditions for over 20 years

VESELECTRICAL SAFETY KIT 36kV

Use : The electrical safety kit allows to assist people in presence of electrical hazards, up to 25 kV network with model VES25 or up to 36 kV network with model VES36.

This kit is particularly suitabl

Stripping knife, energy cable preparation tool.
Guaranteed up to 1000V.
Supplied with blade protection. Standard IEC 60900.
Length 200mm, Weight 60g.

Knife for stripping operation. Supplied with soft case.
Standards EN 60900 / IEC 60900.
Guaranteed up to 1000V.
Length 160mm, Blade length 40mm, Weight 100g.

HV Rescue and operations kit with HRC2 & HRC4 Arc Flash kits. 

RescueStick - Detector combo, Dielectric Overboots, GCA 3 in 1 Insulating Arc Flash gloves 36kV, Insulating Stool, Indoor Wall Mountable Cabin