The PR4-C18-L101220 enables the user to make a circular and longtitudinal cut in order to remove cable's outer sheath.

All cutting depth ranging from 0.5mm / 0.020in to 5mm

LMF2-S blade for thick outer sheath and primary insulation.
Cutting depth 11mm.

LMF2 blade for outer sheath and primary insulation.
Cutting depth 7mm.

The red SR stylus can remove the outer semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm
Diameter: ø16 - 58 mm 
Must be used with the following too

This plier removes the outer sheath with 3 adjustable cutting depths.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1mm and an interchangeable longitudinal cutting cartridge. (not

Alroc Saw for cutting armoured cable wires and hard outer sheaths.
Made of Aluminium so it is lightweight and only requires one hand to operate.

PINTEL 4 BT Cable Stripper pliers.
Enables to make circular and longitudinal cut, including LV/MV cylindrical or sectoral conductor, in order to remove cable’s outer jacket.
For cable from 9 mm to 30 mm.
Circular cutting: 3.3

Alroc Sheath Stripper 21-35mm, removes the outer sheath.
Circular cutting thickness capacity 2,8mm.
Longitudinal cutting capacity 2,8mm.

RED TRL Blade NOT included

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 1.5mm and an interchangeable

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

This plier removes the outer sheath.
Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.8mm and longitudinal cut depth of 3.3mm
For the cables outside diameter ranging between 26

Alroc Leadsheath Pliers for cables outside diameter ranging between 26 - 52mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Insulated tool. Guaranteed u

This plier removes the outer sheath with 3 adjustable cutting depths. Stripping tools designed for circular and longitudinal cutting.
This model has a circular cut depth of 2.0mm and an interchangeable longitudinal TRL cutting cartridge.

Alroc Leadsheath Pliers for cables outside diameter ranging between 46 – 74 mm.
Stripping tools designed for circular and longitudinal cutting.
External sheet removal becomes easy with this strong pliers.
Guaranteed up t

ALROC BMF-40-90 tool to carry out tools stop. 
It’s a great tool to prepare the cable ready for joint installation, termination or connector. 
Cable diameter from Ø40 to 90mm. 

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work. 

The Alroc CAMF4/40-90-BBCF enables the user:
-To remove the bonded semiconductor
-To remove the Primary/XLPE insulation
Diameter of the cable from 40 to 90 mm.

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

The green SCH stylus can make a chamfer on the extremity of the primary insulation.
Diameter: ø16 - 60 mm.
Must be used with the following tools: MF1+/25, MF1+/60, MF3/40, MF3/60, MF3/40-SR, MF3/60-SR, MF3/40-C, MF3/60-C

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

The DSP tool remove and catch the peelable semiconductor at the end of cable.
Diameter: ø10 - 80 mm.
Can be used with the following tools: MF1+/25, SR, SRC, MF1+/60, SRC-D, MF3/40, MF3/60.

ALROC stripping Tool. 6 sections from 16 to 150mm².
Low voltage cable stripper 6 sections. For overhead cable. Enables the user to remove the insulation.
Sections : 16 - 25 - 35 - 54,6 - 70 - 150m²
Length 130mm, Width 130m

The Alroc EVP enables the user to flare and spread the lead sheath or the tabs made from the lead sheath. Spread without damaging underlying layers.