You have no items in your shopping cart.
Subtotal: Ex GST $0.00
Search results for 'Connector'
Search results for: 'Connector'
Grid
List
-
185mm Adaptor plate for din 00 160A FS
Busbar adapter for 2 devices, for mounting of SL00/185 at busbar systems with 185mm centre-to-centre distance, for height adaption at SL1-3 Installation height 42mB
-
Cable Core Identifier
The Cable Core Identifier - ONLY while stocks last. This in expensive tool is very easy to use and effective, using three coloured LEDs to confirm correct connection. More info below. -
BMF-40-90 Stop Suit 40-90mm
ALROC BMF-40-90 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø40 to 90mm. -
CWF3-60 Cable Stripper 16-58mm
ALROC CWF3/60 tool removes outer sheath and insulation.
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2 -
BMFD/50-160 Stop Suit 50-160mm
ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm. -
ASCR2 Cable Stripper 20-50mm
ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust -
ASCR1 Cable Stripper 14-40mm
ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust -
CWB/18-60 Cable Stripper 18-60mm
Alroc MV Bonded Semicon Removal Tool for 18 - 60mm outside diameter. Removes the bonded semi-conducting screen without the need of lubrication in joints, terminations or connectors work.
-
-
-
XLPE Insulation Cable Stripper 80-110mm
Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m -
XLPE Insulation Cable Stripper 60-80mm
Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m -
LH2 Insulation Cable Stripper 38-60mm
Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.< -
-
Switch Disc SLTL4A-3AS/3X/4 1ph
NH strip-type fuse-switch-disconnector SLTL4A-3AS/3X/4 690V Rated operating current: 1250A Size: NH4a Busbar distance: 185mm poles: 3 -
-
Jean Muller Fuse Strip Disconnector Cable Feeder SL3-3x3/3A-A2 3ph 630A (Unboxed )
Jean Muller Fuse Strip Disconnector Cable Feeder SL3-3x3/3A-A2 3ph 630A (Unboxed ) .The FSD operates all phases simultaneously , many variations. -
-
Reversible Ratchet Spanner 3/8 inch
Insulated reversible ratchet spanner 3/8inch.
Standards : EN 60900 / IEC 60900 / ISO 1174-1 / ISO 3315
Guaranteed up to 1000V
Length 190mm, Weight 250g, Square drive 3/8” -
Crimping Tool 5Ah 130kN10-400mm2(Pistol)
BPP1303 -Hydraulic crimping tool operated by battery 18V Li-Ion 3.0Ah, for crimping connectors from 10 to 400 sqmm. Kit consists of Carry Case, Charger, Battery & Pistol Grip BPP Crimper.
Grid
List
