Ø 4mm right-angled banana socket / Horizontal PCB setting up.
CAT III-1000V safety rating.
Rated current: 25A
Insulation: PA6
Contact parts : Ni coated brass
Colour : Red

The PR4-C18-L101220 enables the user to make a circular and longtitudinal cut in order to remove cable's outer sheath.

All cutting depth ranging from 0.5mm / 0.020in to 5mm

• “Universal” tool for end stripping or mid span stripping of outer jackets or insulating material 35-240 and 300-1000sq mm • End stripping and mid span stripping with different blades (interchangeable) • “Du

4 Nm TORQUE LIMITING SCREWDRIVER

For controlled tightening to 4 Nm of electrical meter or circuit breaker terminal blocks. When 4 Nm torque is reached, the torque device trips to allow optimum tightening, and tightening above 4 Nm is impos

Insulated hacksaw. A product designed to do a safe work in LV live working.
Standards: EN 60900 / IEC 60900
Guaranteed up to 1000V
Length 450mm, Weight 740g, Blade length 300mm

The red SR stylus can remove the outer semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm
Diameter: ø16 - 58 mm 
Must be used with the following too

ALROC stripping Tool - insulation 14-40mm OD.
Medium Voltage Energy cable stripper that enables the user to remove the insulation and set up cutting length.
Insulation thickness capacity: 9mm.
Length 270mm, Width 100mm, Height 165mm

ALROC stripping tool for cable from Ø14 to 40mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

ALROC stripping tool for cable from Ø20 to 50mm.
Removes the bonded semi-conductor from MV and HV cables.
Creates a chamfer on the semi-conductor layer to facilitate the installation of joint, termination or connector.
Adjust

MF1+/25 stripping tool for cables from Ø14 to 44mm.
Cable stripper tool removes the bonded semiconductor.
Insulation thickness capacity: 0.4 to 1,4mm.
Length 190mm, Width 85mm, Height 125mm.

ALROC stripping tool for cables from Ø16 to 40mm.
Multifunction cable stripper tool removes outer sheath and insulation.
Insulation thickness capacity: 7mm.
Length 150mm, Width 80mm, Height 100mm.

ALROC stripping tool for cables from Ø16 to 40mm (25 to 240mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC stripping tool for cables from Ø16 to 58mm (25 to 630mm²).
Multifunction cable stripper tool removes outer sheath, peelable semi con (red SR stylus included) and insulation.
Insulation thickness capacity: 7mm.
Leng

ALROC BMFD/50-160 tool to carry out tools stop.
It’s a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø50 to 160mm.
Length 345mm, Width 245mm, Height 50mm.

ALROC CWF3/60 tool removes outer sheath and insulation. 
CWF3/6 is a great tool to prepare the cable ready for joint installation, termination or connector.
Cable diameter from Ø16 to 58mm - Ø0.630-2.2

Alroc XLPE enables a chamfer of 30 mm at the extremity of the insulation of MV cables. For 14-40mm cable diameter.

Alroc LH2 cable tools used by MV-HV jointers to remove the insulation to prepare the cable ready for the installation of joints, terminations or connectors. 
Maximum cutting depth: 17mm.
Length 425mm, Width 105mm, Height 85mm.<

The gold SRC stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø14 - 58 mm.
Must be used with the following to

Alroc LH3 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 24mm.
Cable diameter from 60 to 80mm.
Length 460m

The silver SRC-D stylus can remove the peelable semi-conductor without touching the primary insulation located underneath.
4 scoring depths: 0.4mm / 0.7mm / 0.9mm / 1.1mm.
Diameter: ø16 - 58 mm.
Must be used with the followin

Alroc LH4 cable tools used by MV-HV jointers to remove the insulation.
Prepare the cable ready for the installation of joints, terminations or connectors.
Maximum cutting depth: 29mm
Cable diameter from 80 to 110mm.
Length 640m

The MV Bonded semicon is a very reliable product, well designed using high quality steel and aluminium. This tool is targeted to get a very long-life duration.

VESELECTRICAL SAFETY KIT 36kV

Use : The electrical safety kit allows to assist people in presence of electrical hazards, up to 25 kV network with model VES25 or up to 36 kV network with model VES36.

This kit is particularly suitabl

Insulated Torque Wrench 1/2”.
Standards: EN 60900 / IEC 60900 / EN 6789
Guaranteed up to 1000V
Length 315mm, Weight 850g, Square drive 1/2” Torque capacity 8-50 Nm

Insulated Torque Wrench 3/8”.
Standards: EN 60900 / IEC 60900 / EN 6789
Guaranteed up to 1000V
Length 340mm, Weight 820g, Square drive 3/8” Torque capacity 8-50 Nm

PS2-36KV Wall-mounted rescue kit - 36 kV Indoor or outdoor use. Quick access wall-mounted rescue kit for intervention to rescue a victim in the event of an incident on or near a 36 kV electrical ins

FC3000 accessory. Set of 10 test lead.
Length: 200cm
Cable : PVC 1.5 mm²
Colour: Yellow, Blue, Black, Red, White