Fameca's Wireless Contact Phase Detector supplied by Hylec is a contact phase detector for three phase network with nominal voltages from 4kV up to 230kV. It uses 2 wireless instruments a Transmitter and a Receiver that is pared together and has a visual and audio indicators. This device has a built in test function which simulates all functions including "Out of Phase" indication.

This indoor kit has been designed for and used by an Australian Power Utility and it comes with:

• 2x TAG 5010 units (Transmitter & Receiver)
• 2x Insulating operating stick
• 2x Hazemeyer probes
• 2x Brass disc probes
• 2x Brass bullet probes
• 1x Re-usable Silicone wipe
• 1x Aluminium hard case

Advantages:

• Light and compact units for overhead lines 4-230 kV

• Positive indication for ‘’in phase’’ conditions

• No hazard due to a cable link

• Increase distance of operation (more than 25m)

• Possibility of phasing through walls (inside & outside)

Technical Specifications:

• Transmitter (T) : grey housing 210 mm – Ø 90 mm – 0.630 kg
  Indicates the voltage presence with both visual and acoustic indications, then start to send the phase information to the receiver.

• Receiver (R) : blue housing 210 mm – Ø 90 mm – 0.630 kg
  Indicates the voltage presence, and indicates “in phase” relationship with both visual and acoustic indications.

• Built-in testing element simulating all the functions including "out-of-phase"

• HF radio transmission operating at 433.9 MHz

• Minimum distance range in free air 25 m

• Battery powered: 2x 9 volt alkaline batteries