Download Catalogue     

You have no items in your shopping cart.

Subtotal: Ex GST $0.00

Voltage Detection & Measurement

Field Test Detection & Measurement

Grid  List 
  1. HV voltage detector 110-220kV

    FAMECA HV voltage detector. Compact optical and acoustic detector with LEDs. Designed to test the absence of voltage on Hight-Voltage systems up to 735kV.
    Rated voltage: 110kV to 220kV.
    Frequency: 50 and 60Hz.
    Length: 210mm Diameter

  2. Voltage detector 10kV to 30kV

    FAMECA voltage detector. Compact optical and acoustic detector with LEDs.
    Rated voltage: 10 000V to 30 000V.
    Mains F\frequency: 50 and 60 Hz.
    Length: 275mm, Diameter: 56mm
    Weight: 0.400kg.
    Note: Elbow not included.

  3. Voltage Detector 200MR 11&22/33&66kV

    Voltage Detector 200MR 11&22/33&66kV
  4. Voltage Detector 200MR 11-22& 66kV

    Voltage Detector 200MR 11-22 & 66kV
  5. Indoor Kit w/Tag 200 11/33

    Indoor Kit w/Tag 200 11/33
  6. Vinyl Carry Bag Tag330, Yellow

    Vinyl Carry Bag TAG330 yellow soft back. Picture showing TAG330 - NOT included.
  7. Voltage Detector 1-69kV Multi Range

    The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will detect any nominal voltage o
  8. Voltage Detector 1-69kV Dual Range

    The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

  9. Voltage Detector 1-69kV Single Range

    The Fameca MTag Voltage Detecor supplied by Hylec are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV. This device will d

  10. Hot Stick Poles Rods & Rope Tester

    The TT7R2LW is a mobile device designed for field testing, allowing to inspect the electric insulation’s defects or cleanliness on equipment before using, or within the preliminary frame of the periodical and in

  11. Cable Core Identifier

    The Cable Core Identifier - ONLY while stocks last. This in expensive tool is very easy to use and effective, using three coloured LEDs to confirm correct connection. More info below.
  12. Voltage detector integrated test 127-90k

    FAMECA voltage detector with integrated self-test. Compact optical and acoustic detector with LEDs.
    Rated voltage: 127V to 90 000V.
    Frequency: 50 and 60Hz.
    Length: 195mm, Diameter: 49mm
    Weight: 0.270kg.

  13. Insulated Peg-Plastic clamp 25mm

    Plastic clip for insulating sheets and bands.
    Guaranteed up to 1000V
    Length 165mm, Weight 82g, Capacity 25mm

  14. Supply Meter Tester 230V 50/60Hz

    BTC230 TESTER FOR ELECTRICITY METERS. Use: Creates a load at subscriber meter terminals in order to check they are operating correctly. Suited for electromechanical or electronic meters.

     

  15. Wheel-E Continuity Detector (1 Ohm)

    Testing and measuring the continuity of protective conductors and equipotential bonding.
    Double-sleeved 1mm² PVC cable measurements.
    Reverses automatically the polarities
    CAT III-600V and CAT IV 300V safety rating.
    Measure

  16. Ammeter, LV digital w/hookhead

    C-PROBE LV Ammeter, LV digital w/hookhead. - Allow single operators to measure current on overhead circuits without using platform or ladders. - Soft sensor will avoid stress on LV cable connections - Adapted to night operation: bright yellow

  17. Fameca LV Detector TAG780D Trigger IPX2x

    Fameca TAG780 LV Detector with Trigger IPX2x  Heavy duty voltage detector for checking the absence of voltage and giving voltage level indication on low voltage up to 1000V. This device provides additional features as : Display

  18. Phase Tester 1000V CatIV-IP65w/interface

    Phase Tester 1000V CatIV-IP65 with interface. PHASE TESTER FOR LV NETWORK 1000V CAT IV - IP65 It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors…. UNITAG

  19. HV Remote Electrical Field Detector

    Hand Held Remote Electrical Field Detector with direction Barrell detects live conducts at ground level HV Remote Electrical Field Detector. The DCEDB382 remotely detects the presence of electrical fields from the pylon or even from the groun

  20. Proximity Detector 380v,11,22,66,132kV #

    Proximity Detector 380v,11,22,66,132kV U
    Ex GST $229.00
  21. Modiewark 240V,2,11,22,33,66,132,330kV

    The Modiewark is a Non-Contact & Contact Voltage Detector Proximity and Touch device that detects the presence of an alternating electric field.

    Its uniqu

Grid  List